Rosen Aviation 1702 Series : 17.5 inch WideScreen High definition - Manual (Page 5)

Rosen Aviation 17.5” HD Widescreen Display
Document Number: 102990 Revision: C
Date: 03/17/14
Template: 4.2.3-6-FM; Revision A; 16 May, 2005 Page 5 of 34
1. INTRODUCTION
This manual describes how to install the Rosen 17.5 ” High-definition Widescreen displays onto
your aircraft. It contains everything you need to know to wire the display and confirm that it is
functioning correctly.
Note: Only trained and qualified personnel should perform installation and service.
1.1. Unpacking
The 17.5” displays ship with an RC5 remote control (P/N 0500-019).
1.2. Additional System Materials
Drawings for the Rosen Model 1702 displays are available on the Rosen website at
www.rosenaviation.com .
From the Rosen Aviation home page, select the ProductsDisplaysHigh Definition
Displays tab and browse by product size.
An optional universal color display remote control (sold separately) is compatible for use with the
1702 series displays. Please contact Rosen Sales for P/N availability.
1.2.1. Connector Kits
The following connector kits (sold separately) are recommended for optimal performance:

Connector kit —26-pin female (P/N 0300-043)

Connector kit —25-pin female D-sub (P/N 0300-052)

CVBS and SDI connector kit —BNC (P/N 0300-051)

Component/RGB, digital HDMI/DVI connector kit —25-pin (P/N 0300-029)
2. VIDEO INPUTS
The 1702 series displays enable viewers to watch high-definition video as well as standard-
definition video. Available video inputs include the following:
 2 3G-SDI inputs
 2 composite (CVBS)
 2 DVI inputs (HDMI)
 RGB & Component (YPbPr) - through the DVI connectors only
 Accepts inputs up to 1080p, VGA-WUXGA
Control inputs for these units are via an IR (infrared) remote interface, RS-232, or RS-485 external
inputs. The display connects to 28VDC aircraft power and receives video through a video
distribution amplifier or directly from video sources.