Amprobe AT-5000 Underground-Wire-Tracer - Manual (Page 11)

9
T-5000 LCd display Indicator Icons
Icon description
Direct Connection Mode - When displayed, direct connection operation is active.
Inductive Connection Mode – When displayed, inductive connection operation is active
Clamp – When displayed, a clamp is connected to the transmitter
Battery Status – Displays the available battery charge capacity from low to full.
Sheath Fault Locate– When displayed, sheath fault locate feature is active
Audio Volume – Displays the audio volume level from off to high
% Power Output – Displays the output power percentage in SFL or induction mode
(clamp and internal antenna).
Power Output Level – Displays the output power in Watts (W) in direct connection mode.
Resistance (Ω) Output Level – Displays the loop resistance graph
Constant Power Output – When displayed, constant power feature is active.
Constant Current Output - When displayed, constant current feature is active.
Live Voltage Warning – When displayed, the Power Protection feature is ON.
Signal Select – When displayed, signal select modulation is active.
Active Frequency Menu – Displays the active frequencies.
Indicates an active Bluetooth connection.