Amprobe AT-5000 Underground-Wire-Tracer - Manual (Page 32)

30
Log Memory
Push the 4-way navigation button to highlight Log Memory •
Push Select button to open Log Memory •
Pictures
Selecting Pictures displays the name and size of all Locate Images in memory. Images are recorded in chronological order. No
viewing capability is currently available on the receiver LCD.
To log a picture into the receiver memory, a Bluetooth-ready camera must be ON and ready for transmission. The R-5000 receiver
must also be set on discoverable prior to transferring the image. The captured image can then be transmitted through the
camera’s send function. The receiver’s blue LED will emit confirming that the Bluetooth connection is active.
Record Mode
Record Mode allows the user to select the data logging format. Two choices are available for selection - on depth or on depth
+ Timer.
Push the 4-way navigation button (Up or Down) to highlight an option. •
Push Select button to activate or deactivate an option •
Push Back button to return to previous menu •
R-5000 fREqUENCy SySTEM
The active frequency or the passive band name (power or RF), is always displayed on the top left of the R-5000 receiver
display. When the frequency soft key is used to change frequency, the display is updated as well.
Push Freq button to select the frequency to use. •