PLANET IPX-1500 - Manual (Page 50)

will be involved in establishing this communication link. This is why you may
want to put a limit on the duration of an OPF so that it does not tie up two CO
lines for an extended period of time.
Hunt CO Prefix
This is the code that a caller dials to get to the operator. Your choices are “0”
(recommended) and “9. This code must be different from the CO Access Code
Hunt CO mode PSTN/CO line hunting mode
Operator Rings
Define how many operator personnel will be ring when there are incoming
calls from CO/PSTN side
1 st Operator Ext.
2 nd Operator Ext.
3 rd Operator Ext.
4 th Operator Ext.
5 th Operator Ext.
Enter up to four operator extensions here. Operators are prioritized. The first
operator has the highest priority, which means he/she will be the first operator
that the system will try to access. If the first operator is busy, then the system
will try the second operator, and etc.
Duty Mode.
Pleaese checks this box to enable the duty mode operation, which allows you
to define two duty times: on-duty and offduty. The system can be set up to
work differently in these two duty times.
Duty Time frame
The system works in the regular mode (On-Duty Mode) during the duty time, and in the Off-Duty Mode
outside the duty time. The day is partitioned into two time sections (Section 1 and Section 2),
accommodating lunch break and such. Weekdays (Monday thru Friday) and weekends (Saturday and
Sunday) are also separated for greater flexibility.
Save configurations
Please click on the DONE button to apply the changes.
Advanced PBX config
Advanced PBX configuration is the procedures of configuring the busy tone on Planet IPX-1500 in
order to release line ports after PSTN caller party is hung up.
A caller makes a telephone call to IPX-1500 from PBX/PSTN side and calls to other VoIP device
through the IPX-1500. If the IP side of other VoIP devices do not answer the call and the caller hang up,
50