PLANET IPX-1500 - Manual (Page 57)

57
Parameter Description
Extension No.
The range is 100~899 and you are free to assign any number in this range to
an extension. If two or more extensions are assigned the same number, the
system will try to transfer the call to the one with the lowest physical port
number first. If that extension busy, the system will then try the one with the
second lowest port number, and so on.
Phy line The physical line number of the IP extension
IP IP address information of the extension
MAC MAC address of the extension
Password
Please insert the four-digit number. This password is used in the Usage
Control function described below.
Answer Group
Priority of CO line answering group, The left one will be the first CO group to
answer, selecting “00” will disable the answer group setting
Dial out Group
Priority of CO line dial-out group. The left one will be the first CO group to
dialout, selecting “00” will disable the dial-out group setting
Out call control mode Long distance call access control via locking extension number or password
Out Call Priority (Toll
Restriction)
You can restrict the outward dialing capability with this function if you also set
up the Toll Table. The Toll Table tells the system whether the dialed number is
local, domestic long distance or international.
Unlimited:
No restriction at all.
No City Call:
Only internal dialing is allowed. No outward dialing is allowed.
No Domestic:
Only internal dialing and domestic local dialing are allowed.
No International:
All are allowed except international dialing.
CO to COTx auth Allow or forbit the transfer between CO calls
COTX2EXT (Incoming
CO Transfer)
If this feature is enabled, incoming CO calls can be transferred to this
extension by the system (via the auto attendant or the Ring Through function).
If this feature is disabled, incoming calls cannot be transferred to this
extension directly. Therefore, the only way for an outside caller to talk to this
extension is to call another extension (which allows Direct Inward Transfer)
first, and ask to be transferred manually to this extension.
Talk Time Warning
(Usage Abuse
Reminder)
In order to prevent people from talking on the phone for too long, the system
can be set up to play a reminder tone when the Usage Abuse Time is reached.
The call will then be forced to disconnect in 30 seconds. This function,
however, does not apply to internal communications (extension to extension).