I 2 of 5 set length 2, Default, Interleaved 2 of 5 (i 2 of 5) — cont – Datalogic QuickScan Lite QW2100 User Manual
Page 170
Advertising
Symbologies
160
QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Interleaved 2 of 5 (I 2 of 5) — cont.
I 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
. Length 2 is the
maximum label length if in
Mode, or the second fixed length if in
Mode. The length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length). See
for more detailed programming instruc-
tions.
$CI2L2
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
Advertising