Datalogic QuickScan Lite QW2100 - Manual (Page 201)

Code 11
Product Reference Guide 191
ENTER/EXIT PROGRAMMING MODE
Code 11 — cont.
Code 11 Set Length 1
This feature specifies one of the bar code lengths for Code 11 Length Control . Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed
Length Mode. Length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. See Set Length 1 on page 268 for more
detailed programming instructions.
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT 04 = Length 1 is 4 Characters