Default, Interleaved 2 of 5 (i 2 of 5) — cont, I 2 of 5 character correlation – Datalogic QuickScan Lite QW2100 User Manual
Page 171: I 2 of 5 zero pattern
Interleaved 2 of 5 (I 2 of 5)
Product Reference Guide
161
ENTER/EXIT PROGRAMMING MODE
Interleaved 2 of 5 (I 2 of 5) — cont.
I 2 of 5 Character Correlation
When correlation is enabled, the bar code reader will combine label data from multiple scans
when decoding. Enabling correlation will help the reader read labels that have some spots and/or
voids. It may also help read labels that have damaged areas. Enabling correlation will also
increase the chances that a label will be read incorrectly.
I 2 of 5 Zero Pattern
Enables/disables ZERO-Digit decoding. This character does not represent any cipher. It allows
encoding of an odd number of ciphers with Interleaved 2 of 5. It must be enabled to decode
Code 2 of 5 CIP/HR.
$CI2CO00
I 2 of 5 Character Correlation = Disable
$CI2CO01
I 2 of 5 Character Correlation = Enable
DEFAULT
$CI2ZP00
I 2 of 5 Zero Pattern = Disable
$CI2ZP01
I 2 of 5 Zero Pattern = Enable
DEFAULT