Code 11 set length 2, Default, Code 11 — cont – Datalogic QuickScan Lite QW2100 User Manual
Page 202
Advertising
Symbologies
192
QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Code 11 Set Length 2
This feature specifies one of the bar code lengths for
. Length 2 is the
maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
for more detailed programming
instructions.
$CC1L2
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
Advertising