Datalogic QuickScan Lite QW2100 - Manual (Page 232)

Symbologies
222 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Code 93 — cont.
Code 93 Set Length 2
This feature specifies one of the bar code lengths for Code 93 Length Control . Length 2 is the
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Length includes the bar code’s check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
Set Length 2 on page 269
for more detailed programming
instructions.
$CC9L2
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT 50 = Length 2 is 50 Characters