Datalogic QuickScan Lite QW2100 - Manual (Page 208)

Symbologies
198 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 — cont.
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check character.
Standard 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2 of 5 label must be
decoded before it is accepted as good read.
$CS2CT00 
Standard 2 of 5 Check Character Transmission = Don’t
Send
$CS2CT01 
Standard 2 of 5 Check Character Transmission = Send
DEFAULT
$CS2MR01 
Standard 2 of 5 Minimum Reads = 1
$CS2MR02 
Standard 2 of 5 Minimum Reads = 2
$CS2MR03 
Standard 2 of 5 Minimum Reads = 3
$CS2MR04 
Standard 2 of 5 Minimum Reads = 4
DEFAULT