Kurzweil PC3 SoundEditor - Manual (Page 79)

79
Individual Setup Options
Right-clicking on any Setup in the Setup List Window will produce a contextual menu
displaying the options for the selected Setup:
When the „Copy‟ option is
chosen, SoundEditor will copy
the selected Setup.
Selecting the „Paste/Write‟
option will allow you to paste
the previously copied Setup to
the current location. When
pasted, the Setup is
automatically written to the PC3
at the current location. Note that the „Paste/Write‟ option is only available if a Setup has
already been copied. If no Setup has been copied previously, the „Paste/Write‟ option does not
appear.
Selecting the „Rename‟ option will allow you to rename the selected Setup in the Setup Display
field at the top of the Editor window.
When the „Load/Write Setup from File‟ option is selected, a „Load Setup Data‟ window will
appear. You will need to navigate to and select a Setup to load. Note that valid Setup files
have a „.3ss‟ extension in the file name. Make a selection and click OPEN. The selected Setup
will be loaded into SoundEditor and automatically written to the PC3.
When the „Save...‟ option is selected, a „Save Setup Data‟ window will appear. The name of
the PC3 Setup will appear in the „Save As‟ name field, but you have the option to change it
prior to saving. Make any desired changes and then select the destination location where the
file will be stored. Click SAVE to save the file.
The „Delete‟ option is used to delete the selected Setup in SoundEditor. It does not delete the
Setup on the PC3. When „Delete‟ is selected, you will be prompted with a dialog box asking
you to confirm this operation. In the dialog box, click YES to proceed, or click CANCEL to
cancel the operation.