Kurzweil PC3 SoundEditor - Manual (Page 95)

95
Virtual MIDI Port
The Macintosh version of SoundEditor includes a Virtual MIDI Interface that allows you to
connect the SoundEditor application between your MIDI Sequencer (Logic, ProTools, Cubase,
etc.) and the PC3.
Under the MIDI PORT CONNECTIONS tab in the MIDI Setup window, you‟ll notice MIDI In
and MIDI Out ports labeled „Kurzweil PC3 SE Virtual Output‟ and „Kurzweil PC3 SE Virtual
Input‟ respectively. These ports are established by the SoundEditor application to provide a
virtual MIDI bridge between it, your MIDI Sequencer and the PC3:
NOTE: The Virtual ports should never be selected - they are shown here for illustrative
purposes only. The Virtual ports are always active and are designed to be used exclusively by
the MIDI applications that will be communicating with SoundEditor.
The Virtual MIDI Port function allows SoundEditor to interact with the PC3 while continuing to
pass MIDI data to your MIDI Sequencer.
To configure your sequencer for this setup, select “Kurzweil PC3 SE Virtual Output Port” as
your MIDI Input port and “Kurzweil PC3 SE Virtual Input Port” as your MIDI Output port. With
this setup, the sequencer will receive MIDI data from the Virtual Output and transmit MIDI data
to the Virtual Input.