Important waste disposal information, Normal usage guidelines, 3 important waste disposal information – Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 11: 4 normal usage guidelines
11
Planar UltraRes W Series User Manual
020-1420-00A
Page | 11
3.3 Important Waste Disposal Information
Please recycle or dispose of all electronic waste in accordance with local, state, and federal
laws. Additional resources can be found online at
http://www.planar.com/about/green/
.
The crossed-out wheelie bin symbol is to notify consumers in areas subject to Waste Electrical
and Electronic Equipment (WEEE) Directive 2012/19/EU that the product was placed on the
market after August 13, 2005 and must not be disposed of with other waste. Separate collection
and recycling of electronic waste at the time of disposal ensures that it is recycled in a manner
that minimizes impacts to human health and the environment. For more information about the
proper disposal of electronic waste, please contact your local authority, your household waste
disposal service, or the seller from whom you purchased the product.
3.4 Normal Usage Guidelines
Normal use of the LCD is defined as operating in the open air to prevent heat buildup, and
without direct or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight
that can cause the displays to experience high operating temperatures. For all displays, do not
block fans or ventilation openings. If the LCD display will be installed in a recessed area with an
LCD surround or enclosure, ensure adequate openings are applied for proper air flow and
ventilation.
It is up to the installer to ensure that display placement is changed, thermal shielding is provided
and/or additional ventilation is provided to keep the display within its nominal operating
parameters. Maximum ambient operating temperatures for the Planar UltraRes W Series are:
• 0-40°C at up to 3000 meters
Cooling Requirements
For optimal performance, active cooling by the installer should be planned for when the ambient
temperature anywhere in the wall is predicted to be above the specified ambient temperature for
the display.