Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 49
49
Planar UltraRes W Series User Manual
020-1420-00A
Page | 49
Note:
The UltraRes W Series shows only 10 events.
Set Date and Time
• Set the internal system clock. If Use Network Time is unchecked, you can set the following
settings individually: Time Zone, Year, Month, Day, Date, Hour, and Minute.
•
Note:
If Use Network Time is checked and DHCP is unchecked, the display will be unable
to obtain the network time unless a DNS server is programmed. This is done via the DNS
Server setting in the Network menu or the serial command interface.
Set Event 1~Event 20
•
Event Enabled:
Turns on the event. If disabled, the settings are saved so that the event
can be re-enabled.
•
Frequency:
The frequency of the event. Options are Daily, Weekly, Weekdays,
Weekends.
•
Action:
The action to take for the event. Options are Turn On, Turn Off, Recall, Panel
Brightness.
•
Data:
The preset to recall when the Action is set to Recall, or the backlight setting when
the Action is set to Panel Brightness.