Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 53
53
Planar UltraRes W Series User Manual
020-1420-00A
Page | 53
CEC Enable
• Enables HDMI-CEC (Consumer Electronics Control) with compatible external devices
•
Options:
On, Off:
Default:
Off
CEC Standby
• Enables compatible external devices to put this display into standby with HDMI-CEC
command Standby
•
Options:
On, Off:
Default:
Off
The CEC commands listed in the tables below are implemented:
Command
Value
Image View On
0x04
Text View On
0x0D
Standby
0x36
User Control Pressed
0x44
Routing Change
0x80
Active Source
0x82
Give Physical Address
0x83
Report Physical Address
0x84
Request Active Source
0x85
Give Device Power Status
0x8F
Report Power Status
0x90
Inactive Source
0x9D
CEC Version
0x9E
Get CEC Version
0x9F
Give Features
0xA5
Report Features
0xA6
OPS
OPS Power Down Check
• When enabled, the system will wait for an indication from the OPS module that it has
finished its power down sequence, before going into the standby state specified in
Power
Down Mode
•
Options:
On, Off:
Default:
Off