Using the touch screen, Connecting a touch-capable source, 1 connecting a touch-capable source – Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 57
57
Planar UltraRes W Series User Manual
020-1420-00A
Page | 57
18. Using the Touch Screen
You can use the touch screen to control your Windows, Mac or Linux operating system. The
Planar UltraRes W Series is HID compliant, delivering up to 50 points of touch on the URW105
touch model on both Windows and Linux without a driver. Single touch only is supported for
Mac operating systems. To achieve more than single touch Mac support, drivers will need to be
installed, which can be found on
18.1 Connecting a Touch-capable source
OPS: Connection from the touch sensor to the OPS device is enabled by default.
USB-C: USB-C sources can carry power, video, audio and touch signals over a single
USB-C cable. Connection from the touch sensor to the USB-C input is enabled by
default
HDMI: HDMI sources require a USB cable to connect the touch sensor to the HDMI
source.
DisplayPort: DisplayPort sources require a USB cable to connect the touch sensor to the
DisplayPort source
Note:
See USB Upstream section (page 54) for USB configuration settings