Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor - Manual (Page 28)

28
Planar UltraRes W Series User Manual
020-1420-00A
Page | 28
16.1 Hex Codes
Below is a list of all hex codes supported by the URW105 models and those on the included IR
remote (952-0088-00).
Function
Customer
Code
Hex
Code
Description
INFO 40AF 04FB Provides source and resolution information
40AF 1CE3 Turns the display on and off
VGA /
USB-C
40AF 07F8 Selects the USB-C input for the currently selected zone
DP1 40AF 08F7 Selects the DP1 input
HDMI1 40AF 09F6 Selects the HDMI 1 input for the currently selected zone
DP2 40AF 0BF4 Selects the DP2 input for the currently selected zone
HDMI2 40AF 0CF3 Selects the HDMI 2 input for the currently selected zone
P-
POSITION
40AF 1AE5
When in PiP (Picture-in-Picture) view, selects the PiP
position
OPS 40AF 15EA Selects the OPS source for the currently selected zone
HDMI3 40AF 10EF Not used
PIP 40AF 11EE Toggles between Single, Dual and PiP view modes
HDMI4 40AF 16E9 Not used
SWAP 40AF 06F9
When in a multi source view mode, swaps the sources
displayed in Zone 1 and Zone 2
P-SOURCE 40AF 13EC Displays the Zone 2 Source selection menu

40AF 02FD Navigates up through on screen menus

40AF 01FE Navigates left through on screen menus
MENU 40AF 0EF1
Opens the display’s on-screen menu system. When the
menu system is already open, pressing this button will exit
the menu

40AF 03FC Navigates right through on screen menus

40AF 19E6 Navigates down through on screen menus
Enter

40AF 12ED Selects the current menu item