Inputs and views menu – Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 35
Page | 35
Planar UltraRes W Series User Manual
020-1420-00A
17. Inputs and Views Menu
This menu shows how the sources will be laid out on the screen based on the current Multi-
Source View and Advanced Layouts selections.
Multi-Source View
• Select the Multi-Source View mode
•
Options:
Single View, Dual View, PiP, Advanced Layouts;
Default:
Single
•
Note:
For the Advanced Layouts submenu, refer to the Advanced Layouts Submenu on
page 36.
•
Note:
HDMI 1 and 2 cannot be viewed simultaneously.
•
Note:
DP 1 and DP 2 cannot be viewed simultaneously.
Zone 1
• Select the source displayed in Zone 1
•
Options:
HDMI 1, HDMI 2, DP 1, DP 2, USB-C, OPS;
Default:
USB-C
Zone 2
• Select the source displayed in Zone 2
•
Options:
HDMI 1, HDMI 2, DP 1, DP 2, USB-C, OPS;
Default:
DP 1
Zone 1 Secondary
• Select the source to be displayed in Zone 1 when no signal is detected, and
Auto Scan
Sources
is set to
Failover
.
•
Options:
None, HDMI 1, HDMI 2, DP 1, DP 2, USB-C, OPS;
Default:
None