Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 50
50
Planar UltraRes W Series User Manual
020-1420-00A
Page | 50
EDID Submenu
This menu specifies the EDID format and preferred timing for the selected connector.
Selected Connector
• Set which connector is used
•
Options:
HDMI 1, HDMI 2, DP 1, DP 2, USB-C, OPS
Program EDID
• Program the EDID information for the selected connector based on the selections in the
EDID submenu
EDID Type
• Set the EDID type to determine the base EDID used for the current connector:
•
Options:
5K60,5K30, 4K60, 4K30, 3840x1600, 3440x1440, 2560x1080, 1080P
• 5K60 selects an EDID format compliant with DP 1.4
• 5K30 selects an EDID format compliant with HDMI 2.1 and DP 1.4
• 4K60 selects an EDID format compliant with HDMI 2.0 and DP 1.2
• 4K30 selects an EDID format compliant with HDMI 1.4b and DP 1.1
• 3840x1600 selects an EDID format compliant with HDMI 1.4b and DP1.1
• 3440x1440 selects an EDID format compliant with HDMI 1.4b and DP1.1
• 2560x1080 selects an EDID format compliant with HDMI 1.4b and DP1.1
• 1080P selects an EDID format compliant with HDMI 1.3 and DP 1.1
Enable HDR
• Indicates to the source specified in
Selected Connector
that HDR content is supported
•
Options:
On, Off;
Default:
On (HDMI 1, HDMI 2);
Default:
Off (DP 1, DP 2, OPS, USB-C)
•
Note:
Displaying HDR content requires an HDR compatible source and HDR encoded
content.
•
Note:
HDR sources connected via HDMI require high speed (18Gbps) compatible cables.
Revert to Factory
• Reset the EDID type and timings to the default values for the selected connector