Planar Systems URW105 105" 5K 21:9 Ultra-Wide Commercial Monitor User Manual
Page 54
54
Planar UltraRes W Series User Manual
020-1420-00A
Page | 54
OPS Port
• Changes max resolution for OPS; HDMI for 5K30 and DP for 5K60
•
Options:
HDMI, DP;
Default:
HDMI
USB Upstream
• Provides mapping for the USB ports to each video input. In addition to other USB
peripheral devices, the USB-B ports are used to connect the Planar UltraRes W Series
touch sensor to touch-capable sources that are connected to the HDMI and Display Port
inputs.
•
Note:
In addition to video, audio and power, the USB-C port provides communication
between the Planar UltraRes W Series USB ports and any compatible device connected
to the USB-C input.
DP Out
• Configures downstream port of the DP out
•
Options:
SST, MST;
Default:
SST
DisplayPort Type
• Set the version of DisplayPort that is used by DP 1, DP 2, USB-C and OPS
•
Options:
1.1, 1.2, 1.4;
Default:
1.4
IR Remote ID Code
• Selects the IR remote code set accepted by the display.
•
Note:
The remote that ships with the Planar UltraRes W Series models (952-0088-00)
only supports the default IR code of 01785. Use of any other IR code requires the use of
the optional Planar remote (952-0086-00).
•
Options:
00000-65535;
Default:
01785
Factory Reset
• Return the saved settings in a system to their factory defaults.
Firmware Update
• Update the firmware for the display. Refer to the instructions on the firmware release
package for more information.