Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging - Manual (Page 19)

19
2. Gimbal Operation Mode
 Stabilized mode
The roll axis remains horizontal and the pitch axis is at a user-defined angle. This
mode is suitable for capturing stable horizontal images and videos.
 FPV mode
The roll axis is consistent with the rolling direction of the aircraft and the pitch axis is
at a user-defined angle. This mode is used for the first-person view.
2. Uninstall the Gimbal
1. Place the aircraft on the horizontal surface with the gimbal compartment facing
upwards.
2. Use a T6 screwdriver to loosen the two screws that are fixing the gimbal
protective cover, and then remove the protective cover. Use a cross screwdriver to
loosen the screws that are fixing the FPC connector, and pull the connector cable
port from the slot.