Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging - Manual (Page 32)

32
21
Standard 1/4
interface
Used for connecting to the tripod.
22 Air inlet Used for heat dissipation for the remote controller.
23 Lower hook Used for fixing the strap on the remote controller.
24 Protective cover
Prevents external damage such as collision and wear of
the remote controller.
2.2.2 Use the Remote Controller
1. Check the battery level
Press the power button to view the battery level of the remote controller.
1 LED indicator is normally on: battery
level ≥25%
2 LED indicators are normally on: battery
level ≥50%
3 LED indicators are normally on: battery
level ≥75%
4 LED indicators are normally on: battery
level =100%
2. Turn on/off
Press the power button for 2s to turn the remote controller on/off.
3. Charging
Connect one end of the charging cable to the USB port on the top of the remote
controller, and the other end to an AC power supply (100-240V) through the
adapter.