Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging User Manual
Page 20
20
3. Gently pinch the tail of the vibration absorber with your thumb and index finger.
Slide the gimbal backward and upward along the slot of the gimbal compartment in
a straight line.
3. Mount the Gimbal
1. Pinch the tail of the vibration absorber with your thumb and index finger and lift
the gimbal. Slide the gimbal downwards and forwards along the slot of the gimbal
compartment in a straight line.
Important:
Ensure that the ring at the front of the gimbal is aligned with the two pins in the
gimbal compartment at the nose of the aircraft.
Ensure that the gimbal is at the same height as the slot of the gimbal
compartment.
2. Insert the connector cable port into its slot and gently push it to the end. Place the
cover on the top of the gimbal compartment and re-tighten the cover with a cross
screwdriver.