Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging - Manual (Page 50)

50
4.2.3 Landing and Turning Off the Motor
EVO Ⅱ Dual 640T V3 aircraft can be manually or automatically landed. The
procedure for landing an aircraft is as follows:
1. Manual landing
1. Find an appropriate landing position (flat and open area).
2. When the aircraft arrives above the target position, release the command stick to
hover the aircraft.
3. Slowly push down the left command stick to land the aircraft.
4. After the aircraft lands on the ground,
push the left command stick until the motor
is turned off.
Note
 When the low battery warning (25%) is displayed, the LED indicator on the back
of the aircraft flashes red. In this case, you must immediately let the aircraft land
in a safe place.
2. Automatic landing
When one of the following errors occurs, failsafe will be triggered, and the aircraft
will automatically land from the current position:
 A low battery warning is displayed in a non-GPS environment.
 A critical low battery warning is displayed.