Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging - Manual (Page 54)

54
Question 12: The video is tilted during the flight.
 Place the aircraft horizontally and keep it still.
 Use the app to calibrate the gimbal.
 If the problem persists, adjust the gimbal according to the instructions
described in the relevant section.
Question 13: The lens of the binocular camera is dirty.
 Use a cleaning cloth to wipe the lens. Use the glasses cleaning cloth in the
packing box.
Question 14: A visual error occurs during the flight.
 Use the calibration tool on your PC to calibrate binocular parameters. You can
download the calibration tool for your PC from the official website.
5.3 Storage and Maintenance
To ensure the optimal performance of EVO Ⅱ Dual 640T V3 aircrafts, read and
observe the maintenance instructions in this section carefully.
 Store the aircraft, battery, and remote controller in a clean, dry, cool, and
well-ventilated environment.
 Protect the aircraft from direct sunlight when it is not used.
 Wipe your hands before you operate your drone.
 Clean the camera lens with a soft cloth dipped in alcohol or mild window
cleanser. Do not use any strong detergents or chemicals.
 Keep the battery charger away from any conducting materials.
 Avoid the aircraft and its accessories from falling on a hard surface. Carefully
check every component whenever a collision occurs. Contact Autel Robotics
customer support for any damage.
 Only use the accessories authorized by Autel Robotics, such as a charger. No
warranty shall be provided for any accident caused by using unapproved
accessories.
5.4 Warranty
For users who purchase the products from authorized retailers, Autel Robotics
guarantees that in normal use, the Autel Robotics product you buy is free from
defects in material or workmanship. The warranty period for this product starts on
the day you receive the product. If you cannot provide valid proof of purchase such
as a purchase invoice, the warranty start date will be defined as 90 days after the
delivery date printed on the device or by Autel Robotics.
Important