Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging - Manual (Page 42)

42
3.2 Prepare the Remote Controller
3.2.1 Unfold the Remote Controller
The remote controller is folded in the packing box. Extend the antennas before you
use the remote controller. For details, see
Section 2.2.2 Adjust the antennas.
3.2.2 Turn On/Off the Remote Controller
 Turn on/off
Press and hold the power button for 2 seconds until you hear a short beep.
Important
 Always turn on the remote controller before you turn on the aircraft.
 Always turn off the aircraft before you turn off the remote controller.
3.2.3 Pairing the Aircraft with the Remote Controller
By default, the remote controller is linked to the aircraft before delivery. When
you need to pair them again, you can refer to Section 2.2.2.