Edirol R-4Pro - Manual (Page 100)

100
Main specifications
● USB Interface
A Type Connector (For USB Storage device)
Supports USB 1.1 and 2.0 Mass Storage Device Class.
B Type Connector (For Computer connection)
Supports USB 1.1 and 2.0 Mass Storage Device Class.
● SMPTE Timecode connector
BNC Coaxial type (Conforms SMPTE 12M-1999)
● Effect Type:
Select one of the types below.
• 3-BAND EQ
• 6-BAND GRAPHIC EQ
• NOISE GATE
• ENHANCER
• COMPRESSOR AND DE-ESSER
• MS MIC MIXING
• NO EFFECT
* Available when either recording or playing
* Not available for 88.2, 96, or 192 kHz sampling frequency.
• Power Switch
• Hold Switch
• Input SENS Knobs x 4
• Input Level Knobs x 4
• Monitor Level knob
• Phantom Power Switches: CH1/2, CH3/4
• Limiter Switch • Scrub (Value)/Shuttle Dial
• Transport Buttons: PREV (REW), NEXT (FWD), STOP,
PLAY/PAUSE, REC
• Marker Buttons: CLEAR, PREV, NEXT, MARK
• Function Buttons: WAVE EDIT, EFFECTS, SYSTEM
• A-B Repeat Button
• Display Button
● Display
128 x 64 dots Graphic LCD (backlit LCD)
● Power Supply
AC Adapter (PSB-1U)
Alkaline dry battery LR6 (AA) type x 8, or Nickel-metal
hydride battery (HR15/51) x 8
External Power Supply: 4-pin XLR type (9–16 V)
● Installation Conditions
Temperature: 0 degrees Celsius to 40 degrees Celsius
(according to internal test standards)
Humidity: 80% or less (no condensation)
● Power Consumption
2.0 A
● Dimensions
240 (W) x 217.4 (D) x 77.1 (H) mm
9-1/2 (W) x 8-9/16 (D) x 3-1/16 (H) inches
* The height includes the rubber pads
● Weight (with batteries)
1.7 kg
3 lbs 12 oz
● Accessories
Owner’s Manual
AC Adapter
AC Adapter 4pin XLR type connector converter cable
USB cable
Carrying Case
962a
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
Other Input/Output Part
Effect Unit Part
Control
Others
R-4_e_new.book 100 ページ ２００６年１１月２０日 月曜日 午後１時９分