Edirol R-4Pro - Manual (Page 71)

71
System setup
fig.Fact-uti1.eps
1
Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.fact-reset.eps
2
Use the [CURSOR] buttons to select 11 Factory Reset ,
and press the [ENTER] button.
The Factory Reset screen is shown.
3
Press the [ENTER] button if to perform Factory Reset.
* If you decide to cancel, press the [EXIT] button.
fig.fact-reset2.eps
4
The display displays the “Are you sure?” confirmation
message. Use the [CURSOR] buttons to select “Yes” if
you are sure you want to execute or “No” if you decide to
cancel without executing.
Then press the [ENTER] button.
When processing has completed, you will automatically return to
the System Menu screen.
5
Press the [EXIT] button once again to return to the main screen.
If you want to make other system related settings, use the [CURSOR] buttons to select the desired menu
item.
Executing Factory Reset (Restoring the factory default settings)
R-4_e_new.book 71 ページ ２００６年１１月２０日 月曜日 午後１時９分