Edirol R-4Pro - Manual (Page 39)

39
Playing back
fig.recording-1.eps
1
Press the R-4 Pro [SYSTEM] button.
The system menu screen appears in the display.
fig.player-setup2.eps
2
Use the [CURSOR] buttons to choose 2 Player Setup , and
press the [ENTER] button.
The Player Setup screen appears.
3
Use the [SCRUB/VALUE] dial to choose the Play Mode
value.
* The setting is applied as soon as you select it. You do not need to press the [ENTER] button.
You can also setup the following items.
* The values in boldface are the default values.
* For more about system settings, refer to “System setup” (p. 64).
Setup before playback
Player Setup
Menu
Player Setup
settings
Playback method
Play Mode Single Selects the playback mode.
Only the selected project will play.
Sequential The projects in the folder containing the currently selected project will
play consecutively.
Repeat OFF , ON Selects whether playback will repeat.
If Play Mode is Single, only that project will be repeated. If it is Se-
quential
, the projects in the folder containing the currently selected
project play consecutively, and then the projects in the same folder
will be repeated consecutively from the beginning.
R-4_e_new.book 39 ページ ２００６年１１月２０日 月曜日 午後１時９分