Edirol R-4Pro - Manual (Page 68)

68
System setup
fig.pj-name1.eps
1
Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.pj-name2.eps
2
Use the [CURSOR] buttons to select 8 Project Name , and
press the [ENTER] button.
The Project Name screen is shown.
fig.pj-name3.eps
3
Use the [CURSOR] buttons to select the name you want
to edit, and press the [ENTER] button.
A screen for editing the project name is shown.
4
Use the [CURSOR] buttons, [SCRUB/VALUE] dial,
[CLEAR] button, and [MARK] button to edit the name.
When finished, press the [ENTER] button.
You are returned to the Project Name screen.
* If you decide to cancel, press the [EXIT] button.
5
Press the [EXIT] button once again to return to the Main screen.
If you want to make other system related settings, use the [CURSOR] buttons to select the desired menu item.
Project Name settings
Available characters
(space) !#$%&'()+,-.01234546789;=@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_` abcdefghijklmnopqrstuvwxyz{}
R-4_e_new.book 68 ページ ２００６年１１月２０日 月曜日 午後１時９分