Edirol R-4Pro - Manual (Page 82)

82
Appendix
You can move or copy project recorded on the R-4 Pro to your computer. Likewise, you can move or copy
files from your computer to the R-4 Pro hard disk.
Using battery power will not cause a malfunction, but we recommend that you always use the AC adapter
to prevent damage to the contents of the hard disk, which could occur if the batteries fail while the R-4 Pro
is connected to your computer.
1
Turn on the R-4 Pro power switch.
2
Use a USB cable to connect the R-4 Pro to your computer.
The computer will detect the R-4 Pro, and the screen shown at
right is shown.
It may take several seconds for detection to occur.
* If you see the “Windows can perform the same action each time you insert a disk or connect a device
with this kind of file.” dialog box, click [Cancel].
The computer will detect the R-4 Pro as follows.
3
You can copy WAV files from the R-4 Pro to your computer, or from your computer to
the R-4 Pro.
To copy a file, drag and drop it.
Connecting to a computer
Connecting the R-4 Pro to your computer
Windows When viewed from My Computer or Explorer, the R-4 Pro appears as R-4Pro.
Mac OS The R-4 Pro appears as R-4Pro on the desktop.
R-4_e_new.book 82 ページ ２００６年１１月２０日 月曜日 午後１時９分