Edirol R-4Pro - Manual (Page 67)

67
System setup
fig.recording-1.eps
1
Press the R-4 Pro [SYSTEM] button.
The System Menu screen is shown in the display.
fig.data-1.eps
2
Use the [CURSOR] buttons to select 7 Date & Time , and
press the [ENTER] button.
The Date & Time screen is shown.
fig.data-2.eps
3
Use the [CURSOR] buttons and the [SCRUB/VALUE]
dial to set the date and time.
When finished making settings, press the [EXIT] button.
You are returned to the System Menu screen.
* If you decide to cancel, press the [EXIT] button.
4
Press the [EXIT] button once again to return to the Main
screen.
If you want to make other system related settings, use the [CURSOR] buttons to select the desired menu item.
Date & Time settings
R-4_e_new.book 67 ページ ２００６年１１月２０日 月曜日 午後１時９分