Edirol R-4Pro - Manual (Page 49)

49
Finder functions
fig.finder-1.eps
1
While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the illustration will appear.
Projects are shown in descending alphabetical order.
fig.finder-make1.eps
2
In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select
HD (hard disk)
located at the top level.
Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press the [CURSOR] right button to move into the selected folder (i.e., move to a lower-
level folder).
If you want to move back to the upper-level folder, press the [CURSOR] left button.
fig.finder-cf.eps
* If you want to select the external memory device, select the hard disk
(HD) and then press the [CURSOR] left button to show the
external memory device (EX). However, if the external memory device
is not mounted, it will not be displayed. See Connection and
removal (p. 79)
* Press the [CURSOR] right button after selecting EX to reference the
external memory device contents.
fig.finder-make2.eps
3
When the screen shown in the figure is displayed, use the
[CURSOR] buttons to select
2 Make Folder .
fig.finder-make3.eps
4
When the screen shown in the figure is displayed, press
the [ENTER] button to confirm the operation.
fig.finder-make4.eps
Do not turn off the power while a folder is being created.
Creating a new folder (Make Folder)
R-4_e_new.book 49 ページ ２００６年１１月２０日 月曜日 午後１時９分