Ericsson RX8000 Series - Manual (Page 101)

Chapter 3
To return to the Service Table Menu and access further menus, press the W (Back)
key twice.
3.5.7.1.1.2 4.1.1.2 - 4.1.1.24 Service ID Slots 2-24
If the unit is a multi-service descrambler (depending on the model and licenses
enabled) there can be up to 24 menus similar to that shown in Para 3.5.7.3. Each
menu displays the Service ID and Status for each slot of descramble service
selection.
3.5.7.2 4.2 Director
This menu allows access and editing of the Ericsson’s Director options (dependent
on model and option licences obtained). To access the Director menu, press the T
(Down) key. The following screen is displayed:
CA |DIRECTOR
4.2 | >
3.5.7.2.1 4.2.1 Over Air Message
To access this option, press the X (Forward) key. The following screen is displayed:
DIR |Over Air MESSAGE
4.2.1 | >
3.5.7.2.2 4.2.2 Broadcaster ID
To access and Edit this option, press the T (Down) key. The following screen is
displayed and the Edit key is lit:
DIR |BROADCASTER ID
4.2.2 |*****
To edit the Broadcaster ID:
1. Press the Edit key. The cursor appears below the first character of the current
ID selection.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.7.2.3 4.2.3 Unique Hardware ID
To view this ID, press the T (Down) key. The following screen is displayed:
EN/LZT 790 0005 R1A 3-53