Ericsson RX8000 Series - Manual (Page 67)

Chapter 3
SOURCE 1 |SATELLITE FREQUENCY
2.2.2.2 |01550.000 MHz (UNLOCKED)
To edit the frequency setting:
1. Press the Edit key. The cursor appears below the first number.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.2.2.2.3 2.2.2.3 Symbol Rate
To view and edit the current settings of the Source 1 Symbol Rate, press the T
(Down) key. The following screen is displayed and the Edit key is lit:
SOURCE 1 |SYMBOL RATE
2.2.2.3 |22.000000 MSym/s (UNLOCKED)
To edit the Symbol Rate setting:
1. Press the Edit key. The cursor appears below the first number.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.2.2.2.4 2.2.2.4 Modulation
To view and edit the current Source 1 Modulation settings, press the T (Down) key.
The following screen is displayed and the Edit key is lit:
SOURCE 1 |MODULATION
2.2.2.4 |DVB-S
QPSK AUTO FEC (UNLOCKED)
To edit the Modulation setting:
1. Press the Edit key. The cursor appears below the first character.
2. Use the S (Up) and T (Down) keys to toggle between the available modulation
types (dependent on model and option licences obtained).
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
EN/LZT 790 0005 R1A 3-19