Ericsson RX8000 Series - Manual (Page 80)

Chapter 3
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.4.5 2.2.4.5 Network Util 2 (Max Value)
To view and edit the Network Util 2, press the T (Down) key. The following screen
is displayed:
SETUP |NETWORK UTIL 2 (MAX VALUE)
2.2.4.5 |100
To edit the Network Util 2:
1. Press the Edit key. The cursor appears below the first character of the displayed
option.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.4.6 2.2.4.6 MDI Delay Factor (Max Value)
To view and edit the MDI Delay Factor, press the T (Down) key. The following
screen is displayed:
SETUP |MDI DELAY FACTOR (MAX VALUE)
2.2.4.6 |50.000
To edit the MDI Delay Factor:
1. Press the Edit key. The cursor appears below the first character of the displayed
option.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.4.7 2.2.4.7 MDI Media Loss Rate (Max Value)
To view and edit the MDI Media Loss Rate, press the T (Down) key. The following
screen is displayed:
SETUP |MDI MEDIA LOSS RATE (MAX FACTOR)
EN/LZT 790 0005 R1A 3-32