Ericsson RX8000 Series - Manual (Page 146)

Chapter 5
• Test Pattern Standard - allows the selection of the test pattern standard from a
drop-down menu.
• Video Output Mode - allows the selection of the video output mode from a
drop-down menu.
Note: 4:2:2 video cannot be up-scaled or cross-converted on RX8200.
• VGA Output Format - allows the selection of the VGA output format from a
drop-down menu.
• VGA Output Sync - allows the selection of the VGA output sync from a drop-
down menu.
User-editable fields in the Audio Section – Decoders 1-6
• User PID – allows the input of the user PID for audio decoding.
• User Std - allows the selection of the audio standard from a drop-down menu.
• Routing – allows the selection of stereo routing mode from a drop-down menu.
• Delay Adjustment – allows the input of a delay value in ms.
• Dynamic Range Control – allows selection of dynamic range control mode
from a drop-down menu.
• Line Mode Adjust – allows selection of the level of line mode adjustment from a
drop-down menu.
Any changes which are made to the Decode > Advance page may be confirmed by
selecting the Apply Changes button. Selecting the Refresh button will ensure that
the latest information is being displayed from the current values of the equipment.
5.2.11.2 Decode > VBI-VANC
This page gives access to Vertical Blanking Interval-Vertical Ancillary Data Space
(VBI-VANC) parameters. To view this page, select the VBI-VANC button from the
Decode page.
EN/LZT 790 0005 R1A 5-30