Ericsson RX8000 Series - Manual (Page 95)

Chapter 3
3.5.5.2.2.9 2.2.2.8 Sync Miss Limit
To access the Sync Miss Limit Setup function, press the T (Down) key. The
following screen is displayed:
SETUP |SYNC MISS LIMIT 003
2.2.2.9 |
To set the Sync Miss Limit value:
1. Press the Edit key.
2. Use the S (Up) and T (Down) keys until the required value is obtained.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
This is the last of the G703 screens. To return to the Main menu, press the W (Back)
key three times.
3.5.6 3 Service
The Service menu is used to access and edit the various services to the equipment.
To access the Service menu from the Input menu, press the T (Down) key. The
following screen is displayed:
SERVICE | SERVICE
3 | >
3.5.6.1 3.1 Decode Service
To access the details of this service, press the X (Forward) key. The following
screen is displayed:
SERVICE |DECODE SERVICE
3.1 |2 (NOT PRESENT) >
To select the user Decode Service:
1. Press the Edit key. The cursor appears.
2. Select the service using the S (Up) and T (Down) keys to move between all the
services on the service list as required.
3. Press Save to select the currently displayed service or Edit to abandon the
operation and return to the current setting.
3.5.6.1.1 3.1.1 Service Status
To show the Service ID and the service status, press the X (Forward) key. The
following screen is displayed:
EN/LZT 790 0005 R1A 3-47