Ericsson RX8000 Series - Manual (Page 105)

Chapter 3
Note: Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD
material.
3. Use the W (Back) and X (Forward) keys to toggle between OUTPUT ONE and
TWO.
4. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.8.1.2 5.1.2 Output 3
To edit the output types for output 3 (dependent on model and option licences
obtained), press the X (Forward) key. The following screen is displayed and the
Edit key is lit:
OUTPUT |OUTPUT THREE : SD-SDI
5.1.2 |
To edit the output 3 type:
1. Press the Edit key. The cursor appears at the start of the current option.
2. Using the S (Up) and T (Down) keys toggle between the available options: ASI,
SD-SDI, AUTO and HD-SDI (depending on model and option licences obtained).
Note: Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD
material.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
Press the W (Back) key to return to the Output Selection menu.
3.5.8.2 5.2 TS Feed Selection
To edit the Transport Stream (TS) Feed Selection, press the T (Down) key. The
following screen is displayed and the Edit key is lit:
OUTPUT |TS FEED SELECTION
5.2 | Descrambled
Selecting the Descrambled option will provide a Transport Stream that is post
descramble block. Selecting the Input option will provide a Transport Stream that is
before the descramble block.
To edit the TS feed selection:
1. Press the Edit key. The cursor appears at the start of the current option.
2. Using the S (Up) and T (Down) keys to toggle between the Descrambled and
Input options.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
EN/LZT 790 0005 R1A 3-57