Ericsson RX8000 Series - Manual (Page 93)

Chapter 3
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
4. Use the X (Forward) and W (Back) keys to toggle between the ATM Delta and
ATM Alpha inputs.
To select the ATM Alpha value:
1. Press the Edit key. Press the X (Forward) key until cursor appears below the
current value.
2. Use the S (Up),T (Down) and X (Forward) keys to obtain the required value.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.5.2.2.6 2.2.2.6 ATM Descrambling/ATM Header Correction
To access the ATM Descrambling/ATM Header Correction Setup function, press the
T (Down) key. The following screen is displayed:
SETUP |ATM DESCRAMBLING FALSE
2.2.2.6 |ATM HEADER CORRECTION TRUE
To select the ATM Descrambling value:
1. Press the Edit key. The cursor appears below the displayed type (FALSE shown
above).
2. Use the S (Up) and T (Down) keys to toggle between the available options:
TRUE and FALSE (dependent on model and option licences obtained).
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
4. Use the X (Forward) and W (Back) keys to toggle between the ATM
Descrambling and ATM Header Correction inputs.
To select the ATM Header Correction value:
1. Press the Edit key. The cursor appears below the displayed type (TRUE shown
above).
2. Use the S (Up) and T (Down) keys to toggle between the available options:
TRUE and FALSE (dependent on model and option licences obtained).
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.5.2.2.7 2.2.2.7 ATM Header Err Ignore/ ATM VPI
To access the ATM Header Err Ignore/ ATM VPI Setup function, press the T
(Down) key. The following screen is displayed:
EN/LZT 790 0005 R1A 3-45