Ericsson RX8000 Series - Manual (Page 132)

Chapter 5
• Input Source – allows a choice of Source Selection Mode from the drop-down
menu.
• Primary Input – allows selection of the primary input to the receiver.
• Input Loss Switch Period – allows the user to define a period, in seconds,
before the unit switches to the alternate input (either Input Source or Primary).
• Return to Primary – checking this box specifies that when the Primary is locked
the unit will always return to the Primary after a timeout period.
• Primary Lock Switch Period - allows the user to define a period, in minutes,
before switching back to Primary, if Primary is not currently selected.
Any changes which are made to the Input page may be confirmed by selecting the
Apply Changes button. Selecting the Refresh button will ensure that the latest
information is being displayed from the current values of the equipment.
The Satellite Input button gives access to the Satellite Input folder web page.
5.2.6.1 Input > SAT Input
To view this web page, select the Satellite Input button from the Input page.
Figure 5.17 Satellite Input Web Page
The only field which may be edited by the user is the RF Selection field which
allows selection of the appropriate RF Input.
EN/LZT 790 0005 R1A 5-16