Ericsson RX8000 Series - Manual (Page 30)

Chapter 1
1.7 Rear Panels
All inputs, outputs and control connections are taken via the rear panel. Due to the
modular nature of these units, factory fitted hardware modules with different
connections can be fitted to any unit and therefore only a typical (sample) rear panel
images are shown below.
Full details of the connectors for ALL base models and options are given in
Chapter 2, Installing the Equipment.
Full details of all the options are given in Chapter 6, Options.
ASI/HD-SDI/SD-
SDI OUT 1-3
TECHNICAL
EARTH
AC POWER
IP OUT 1-2
RF IN 1-4
CVBS
ALARM
CONTROL
1-2
ASI INPUT
RX8200
Sample configuration
with: Satellite input,
frame sync, HD video
output, IP Transport
Stream output and 2x
Audio output modules
installed.
RX8310
RX8315
RX8320
RX8330
AUDIO OUT (1)
1-2
INPUT MODULE AUDIO OUT (2)
3-4
COMPONENT
VIDEO
FRAME
SYNC
ETHERNET 1-2 TECHNICAL
EARTH
ASI OUT 1-2 CVBS ALARM ASI INPUT
AC POWER RF IN 1-4 AUDIO OUT (1)
1-2
IP OUT 1-2
Figure 1.6 Rear Panels (RX8200, RX8310, RX8315, RX8320 and RX8330)
EN/LZT 790 0005 R1A 1-22