Ericsson RX8000 Series - Manual (Page 74)

Chapter 3
NETWORK 1 |IP ADDRESS 1
2.2.2 |000.000.000.000 <
To edit the Network 1 IP address:
1. Press the Edit key. The cursor appears below the first character of the address.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.2.1 2.2.2.1 Subnet Mask 1
To view and edit the Subnet Mask 1 address, press the X (Forward) key. The
following screen is displayed:
NETWORK 1 |SUBNET MASK 1
2.2.2.1 |255.255.255.000
To edit the Subnet Mask 1 address:
1. Press the Edit key. The cursor appears below the first character of the address.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.2.2 2.2.2.2 Default Gateway 1
To view and edit the Default Gateway 1 address, press the T (Down) key. The
following screen is displayed:
NETWORK 1 |DEFAULT GATEWAY 1
2.2.2.2 |192.168.000.001
To edit the Default Gateway 1 address:
1. Press the Edit key. The cursor appears below the first character of the address.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
EN/LZT 790 0005 R1A 3-26