Ericsson RX8000 Series - Manual (Page 102)

Chapter 3
DIR |UNIQUE HARDWARE ID
4.2.3 |34390968634
3.5.7.2.4 4.2.4 Manuf ID
To view the manufacturer, model and hardware identifier values, press the T
(Down) key. The following screen is displayed:
DIR |MANUF ID DE HW TYPE 82
4.2.4 |MODEL ID 1D
3.5.7.2.5 4.2.5 Download Status
To view the Download Status, press the T (Down) key. The following screen is
displayed:
DIR |DOWNLOAD STATUS
4.2.5 |IDLE
3.5.7.2.6 4.2.6 Enter New PIN
To enter a new local lockout PIN, press the T (Down) key. The following screen is
displayed and the Edit key is lit:
DIR |ENTER NEW PIN
4.2.6 |****
This allows the user to either change the PIN required to access the front panel
when not in local mode or access the front panel via the previously set PIN. This
depends on receiver mode.
To enter a new PIN:
1. Press the Edit key. The cursor appears below the first character of the current
selection.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.7.2.7 4.2.7 Reset PIN
To reset an existing local lockout PIN, press the T (Down) key. The following
screen is displayed and the Edit key is lit:
DIR |RESET PIN
4.2.7 |*************
EN/LZT 790 0005 R1A 3-54