Ericsson RX8000 Series - Manual (Page 171)

Chapter 6
This option enables two x AAC-LC and HE-AAC decoding.
6.2.21 DVB-S2 16APSK (RX8XXX/SWO/DVBS2/16APSK)
This option is available for the RX8310, 8315 and 8330 Receivers.
This option adds DVB-S2 QPSK, 8PSK and 16APSK capability to the DVB-S2 Input
Option Card.
6.2.22 Null Packet Detection Redundancy Switching
(RX8XXX/SWO/DVBS2/NULL)
This option is available for the RX8200, 8310, 8315, 8320 and 8330 Receivers.
This option provides redundancy switching from a primary to secondary input when
triggered by the presence of null packets in the incoming stream. The user is able to
define the percentage of null packets at which the switch is triggered.
6.2.23 DVB Common Interface (RX8XXX/SWO/CI)
This option is only available for the RX8200 Receiver.
This option enables support for conditional access modules.
6.2.24 BISS CA (RX8XXX/SWO/BISS)
This option is available for the RX8200 and RX8330 Receivers.
This option enables descrambling for BISS modes 1 and E.
6.2.25 BISS Multi-Service CA (RX8XXX/SWO/BISS/MSD)
This option is available for the RX8200 and RX8330 Receivers.
This option enables multi-service decryption for BISS modes 1 and E.
6.2.26 SMPTE 2022 Pro-MPEG FEC (RX8200/SWO/IP/PROMPEG)
This option is only available for the RX8200 Receiver.
This option enables SMPTE 2022 Pro-MPEG FEC capability and requires the
installation of an IP input card.
EN/LZT 790 0005 R1A 6-13