Ericsson RX8000 Series - Manual (Page 19)

Chapter 1
• Status LED indicates input feed lock and general alarm conditions.
• Alarm handling via single configurable alarm relay and a date and time stamped
alarm log.
• 1 x ASI input with 75 Ω connector.
• 2 x ASI Transport Stream outputs with 75 Ω connectors.
• Simple local and remote unit software upgrade in the field.
• Service (program) selection by Service Name or Service ID from a list of all the
available Services carried in the currently received input feed.
• 40 x preset service and component selections can be stored and recalled.
• Unit configurations can be saved and recalled.
• Unit SNMP MIB can be downloaded from the unit.
1.2.1.2 RX8200 Factory Fit Optional Hardware Features
• 4 x L-band DVB-S/S2 satellite inputs.
• MPEG transport stream over IP input using dual 100/1000Base T connectors
and Pro-MPEG FEC.
• 2 x Gigabit IP data / feed output on dual redundant RJ-45 output connectors.
• Frame synchronisation input.
• SD video outputs (dual composite or dual ASI/SDI switchable).
• HD/SD video outputs (composite, RGB/YPrPb, or Triple ASI/SDI/HD-SDI
switchable).
• Balanced audio output.
• RS232 remote control / data.
1.2.1.3 RX8200 Optional Software Features
• DVB-S2 QPSK demodulation.
• DVB-S2 8PSK demodulation.
• DVB-S2 low symbol rate demodulation.
• Web browser password protection for Web Browser.
• MPEG-2 SD decoding.
• MPEG-2 HD decoding and MPEG-2 HD down-conversion.
• MPEG-4 AVC SD decoding.
• MPEG-4 AVC SD decoding and MPEG-4 AVC HD down-conversion.
EN/LZT 790 0005 R1A 1-11