Ericsson RX8000 Series - Manual (Page 228)

Annex B
Defines country of origin.
The packaging is reusable per GB 18455-2001.
This symbol guarantees that packaging with this symbol is
recyclable and will be accepted by cardboard recyclers.
Recyclable per GB 18455-2001.
B.9.8 Materials Declarations
Ericsson’s products are designed and manufactured in keeping with good
environmental practise. Our component and materials selection policy prohibits the
use of a range of potentially hazardous materials. In addition, we comply with
relevant environmental legislation.
B.9.8.1 For the European Union
For products sold into the EU after 1 st July 2006, we comply with the EU RoHS
Directive. We also comply with the WEEE Directive.
B.9.8.2 For China
For product sold into China after 1st March 2007, we comply with the “Administrative
Measure on the Control of Pollution by Electronic Information Products”. In the first
stage of this legislation, content of six hazardous materials has to be declared
together with a statement of the “Environmentally Friendly Use Period (EFUP)”: the
time the product can be used in normal service life without leaking the hazardous
materials. Ericsson expects the normal use environment to be in an equipment room
at controlled temperatures (around 22°C) with moderate humidity (around 60%) and
clean air, near sea level, not subject to vibration or shock.
Where an Ericsson product contains potentially hazardous materials, this is
indicated on the product by the appropriate symbol containing the EFUP. For
Ericsson products, the hazardous material content is limited to lead (Pb) in some
solders. This is extremely stable in normal use and the EFUP is taken as 50 years,
by comparison with the EFUP given for Digital Exchange/Switching Platform in
equipment in Appendix A of “General Rule of Environment-Friendly Use Period of
Electronic Information Products”. This is indicated by the product marking:
EN/LZT 790 0005 R1A B-24