7 signal connections, 1 general, Signal connections -9 – Ericsson RX8000 Series User Manual
Page 41: General -9, Figure 2.3, Location of the technical earth on rx8200 -9, Figure 2.4, Location of the technical earth on rx83xx -9, Caution
Chapter 2
2. Eliminate the migration of stray charges when connecting between equipment.
To do this, connect a wire between the Technical Earth terminal and a suitable
point on the rack.
The Technical Earth provides a suitable connection between the equipment and the
installation to give a low impedance path at normal operating frequencies.
Figure 2.3 Location of the Technical Earth on RX8200
Figure 2.4 Location of the Technical Earth on RX83XX
2.7
Signal Connections
2.7.1
General
Caution!
It is strongly recommended that the terminal marked at the rear panel of the
equipment is connected to a site Technical Earth before any external connections
are made and the equipment is powered. This limits the migration of stray charges.
Technical Earth
Technical Earth
EN/LZT 790 0005 R1A
2-9