Ericsson RX8000 Series - Manual (Page 54)

Chapter 3
3. Service: This menu includes user settings for the currently selected service for
decode from the incoming feed.
4. CA Systems: This menu includes user settings for: the currently selected
services for decryption from the incoming feed, Director parameters and status.
5. Output: This menu includes user settings for: Output selection, TS Feed
Selection.
6. Presets: This menu includes user settings for storing and retrieving of up to
40 sets of input parameters (tuning parameters and service selections).
3.3.4 Arrow Pushbuttons (Up, Down, Left, Right)
Four arrow pushbuttons (or keys) are used to navigate through the front panel LCD
menus.
Each arrow pushbutton is backlit by an integral LED when active, indicating that a
further choice or action is available by pressing that pushbutton.
S = Up
T = Down
W = Left (Back)
X = Right (Forward)
3.3.5 Edit and Save Pushbuttons
The Edit and Save pushbuttons are used to modify and store user settings within
the selected menu.
The Edit pushbutton is backlit by an integral LED when the current menu contains
an editable setting.
To edit a user setting within the selected menu:
1. Press the Edit pushbutton and then use the W (Back) and X (Forward)
pushbuttons to move the cursor within that menu (if necessary).
2. Change the value of the setting using the S (Up) and T (Down) pushbuttons.
During this edit operation, both the Edit and Save pushbuttons will be lit.
The Save pushbutton is backlit by an integral LED when changes have been made
to a setting that require saving.
When a user setting has been modified:
1. Press the Save pushbutton to confirm and action this new setting.
EN/LZT 790 0005 R1A 3-6